قالب:صندوق معلومات تجمع سكاني/doc



This template can be used to produce an ويكيبيديا:دليل الأسلوب/صناديق المعلومات for human settlements (cities, towns, villages, communities) as well as other administrative districts, counties, provinces, etc. - in fact, any subdivision below the level of a country, for which {{ص.م بلد}} should be used. Available fields are described in the table below.

الاستخدام

عدل

Please verify that adding the template does not overlay, or get overlaid by, other templates on the article. Please test your changes with several skins and several browsers, and several browser window sizes.

  • Important: Please enter all numeric values in a raw, unformatted fashion. References are to be included in their respective section footnotes field. Numeric values that are not "raw" may create an "Expression error". Raw values will be automatically formatted by the template. If you find a raw value is not formatted in your usage of the template, please post a notice on the discussion page for this template.
  • Expression Error may also be caused when any coordinate parameter has a value, but one or more coordinate parametes are blank of invalid.


Complete Empty Syntax

عدل

For questions see the talk page.

{{Infobox settlement
<!-- See Template:Infobox settlement for additional fields that may be available -->
<!-- See the Table at Infobox settlement for all fields and descriptions of usage -->
<!-- Basic info ---------------->
|name                   = <!-- at least one of the first two fields must be filled in -->
|official_name          = 
|other_name             =
|native_name            = <!-- if different from the English name -->
|native_name_lang       = <!-- Use ISO639 code, e.g. "fr" for French.
                               If there is more than one native name, in different languages,
                               enter those names using {{lang}}, instead -->
|nickname               = 
|settlement_type        = <!--such as Town, Village, City, Borough etc.-->
|total_type             = <!-- to set a non-standard label for total area and population rows -->
|motto                  =
<!-- Transliteration ----------->
|translit_lang1         = 
|translit_lang1_type    =
|translit_lang1_info    =
|translit_lang1_type1   =
|translit_lang1_info1   =
|translit_lang1_type2   =
|translit_lang1_info2   =
|translit_lang1_type3   =
|translit_lang1_info3   =
|translit_lang1_type4   =
|translit_lang1_info4   =
|translit_lang1_type5   =
|translit_lang1_info5   =	
|translit_lang1_type6   =
|translit_lang1_info6   =
|translit_lang2         =
|translit_lang2_type    =
|translit_lang2_info    =
|translit_lang2_type1   =
|translit_lang2_info1   =
|translit_lang2_type2   =
|translit_lang2_info2   =
|translit_lang2_type3   =
|translit_lang2_info3   =
|translit_lang2_type4   =
|translit_lang2_info4   =
|translit_lang2_type5   =
|translit_lang2_info5   =
|translit_lang2_type6   =
|translit_lang2_info6   =
<!-- Images and maps ----------->
|image_skyline          = 
|imagesize              = 
|image_caption          = 
|image_flag             = 
|flag_size              =
|image_seal             = 
|seal_size              =
|image_shield           = 
|shield_size            =
|image_blank_emblem     =
|blank_emblem_type      =
|blank_emblem_size      =
|image_map              = 
|mapsize                = 
|map_caption            = 
|image_map1             = 
|mapsize1               = 
|map_caption1           = 
|image_dot_map          =
|dot_mapsize            =
|dot_map_caption        =
|dot_x =  |dot_y =
|pushpin_map            = <!-- name of a location map as per Template:Location_map -->
|pushpin_label_position = <!-- position of the pushpin label: left, right, top, bottom, none -->
|pushpin_map_caption    =
|pushpin_mapsize        =
<!-- Location ------------------>
|subdivision_type       = <!--البلد-->
|subdivision_name       = <!--اسم البلد-->
|subdivision_type1      = 
|subdivision_name1      = 
|subdivision_type2      = 
|subdivision_name2      = 
|subdivision_type3      = 
|subdivision_name3      = 
|subdivision_type4      = 
|subdivision_name4      =
<!-- Smaller parts (e.g. boroughs of a city) and seat of government -->
|seat_type              =
|seat                   =
|parts_type             =
|parts_style            = <!-- list, coll (collapsed list), para (paragraph format)
                               Default is list if up to 5 items, coll if more than 5-->
|parts                  = <!-- parts text, or header for parts list -->
|p1                     =
|p2                     = <!-- etc. up to p50: for separate parts to be listed--> 
<!-- Politics ----------------->
|government_footnotes   =
|government_type        =
|leader_party           = 
|leader_title           =
|leader_name            =  <!--add &nbsp; (no-break space) to leader names to disable automatic links-->
|leader_title1          =  
|leader_name1           =
|leader_title2          =
|leader_name2           =
|leader_title3          =
|leader_name3           =
|leader_title4          =
|leader_name4           =
|established_title      = <!-- Settled -->
|established_date       = 
|established_title1     = <!-- Incorporated (town) -->
|established_date1      = 
|established_title2     = <!-- Incorporated (city) --> 
|established_date2      = 
|established_title3     =  
|established_date3      =
|extinct_title          =
|extinct_date           =
|founder                =
|named_for              =
<!-- Area    --------------------->
|area_magnitude         = <!-- use only to set a special wikilink --> 
|unit_pref              = <!--Enter: Imperial, to display imperial before metric-->
|area_footnotes         =
|area_total_km2         = <!-- ALL fields with measurements are subject to automatic unit conversion-->
|area_land_km2          = <!--See table @ Template:Infobox settlement for details on unit conversion-->
|area_water_km2         =
|area_total_dunam       = <!--Used in Middle East articles only-->
|area_total_sq_mi       =
|area_land_sq_mi        =
|area_water_sq_mi       =
|area_water_percent     =
|area_urban_km2         =
|area_urban_sq_mi       =
|area_metro_km2         =
|area_metro_sq_mi       =
|area_blank1_title      =
|area_blank1_km2        =
|area_blank1_sq_mi      =
<!-- Elevation -------------------------->
|elevation_footnotes    =  <!--for references: use <ref> tags-->
|elevation_max_footnotes=  <!--for references: use <ref> tags-->
|elevation_min_footnotes=  <!--for references: use <ref> tags-->
|elevation_m            = 
|elevation_ft           =
|elevation_max_m        = 
|elevation_max_ft       =
|elevation_min_m        = 
|elevation_min_ft       =
<!-- Population   ----------------------->
|population_as_of               =
|population_footnotes           =
|population_note                =
|population_total               =
|population_density_km2         = <!--For automatic calculation, any density field may contain: auto -->
|population_density_sq_mi       =
|population_est                 =
|pop_est_as_of                  =
|population_metro               =
|population_density_metro_km2   =
|population_density_metro_sq_mi =
|population_urban               =
|population_density_urban_km2   =
|population_density_urban_sq_mi =
|population_blank1_title        =
|population_blank1              =
|population_density_blank1_km2  =   
|population_density_blank1_sq_mi=
|demographics_type1             =
|demographics1_footnotes        =
|demographics1_title1           =
|demographics1_info1            =
|demographics1_title2           =
|demographics1_info2            =
|demographics1_title3           =
|demographics1_info3            =
|demographics1_title4           =
|demographics1_info4            =
|demographics1_title5           =
|demographics1_info5            =
|demographics_type2             =
|demographics2_footnotes        =
|demographics2_title1           =
|demographics2_info1            =
|demographics2_title2           =
|demographics2_info2            =
|demographics2_title3           =
|demographics2_info3            =
|demographics2_title4           =
|demographics2_info4            =
|demographics2_title5           =
|demographics2_info5            =
<!-- General information  --------------->
|timezone1              = 
|utc_offset1            = 
|timezone1_DST          = 
|utc_offset1_DST        = 
|coor_pinpoint          = <!-- can be used to specify exactly where/what the coordinates refer to -->
|coordinates_type       = 
|coordinates_display    = display=inline,title <!-- delete unwanted option, if any -->
|latd= |latm= |lats= |latNS=
|longd= |longm= |longs= |longEW=
<!-- Area/postal codes & others -------->
|postal_code_type       =  <!-- enter ZIP code, Postcode, Post code, Postal code... -->
|postal_code            =
|postal2_code_type      =  <!-- enter ZIP code, Postcode, Post code, Postal code... -->
|postal2_code           =
|area_code_type         =
|area_code              =
|توأم1                  =
|توأم1_البلد            =
|توأم2                  =
|توأم2_البلد            =
|توأم3                  =
|توأم3_البلد            =
|توأم4                  =
|توأم4_البلد            =
|توأم5                  =
|توأم5_البلد            =
|توأم6                  =
|توأم6_البلد            =
|توأم7                  =
|توأم7_البلد            =
|blank_name_sec1        =
|blank_info_sec1        =
|blank1_name_sec1       =
|blank1_info_sec1       =
|blank2_name_sec1       =
|blank2_info_sec1       =
|blank3_name_sec1       =
|blank3_info_sec1       =
|blank4_name_sec1       =
|blank4_info_sec1       =
|blank5_name_sec1       =
|blank5_info_sec1       =
|blank6_name_sec1       =
|blank6_info_sec1       =
|blank_name_sec2        = 
|blank_info_sec2        =
|blank1_name_sec2       = 
|blank1_info_sec2       =
|blank2_name_sec2       = 
|blank2_info_sec2       =
|blank3_name_sec2       = 
|blank3_info_sec2       =
|blank4_name_sec2       = 
|blank4_info_sec2       =
|blank5_name_sec2       = 
|blank5_info_sec2       =
|blank6_name_sec2       = 
|blank6_info_sec2       =
|website                = 
|footnotes              = 
}} 

Basic Empty Syntax

عدل

For questions see the talk page.

{{Infobox settlement
<!--See Template:Infobox settlement for additional fields that may be available-->
<!--See the Table at Infobox settlement for all fields and descriptions of usage-->
<!-- Basic info  ---------------->
|name                   = <!-- at least one of the first two fields must be filled in -->
|nickname               = 
|settlement_type        = <!-- e.g. Town, Village, City, etc.-->
|total_type             = <!-- to set a non-standard label for total area and population rows -->
|motto                  =
<!-- images and maps  ----------->
|image_skyline          = 
|imagesize              = 
|image_caption          = 
|image_flag             = 
|flag_size              =
|image_seal             = 
|seal_size              =
|image_shield           = 
|shield_size            =
|image_blank_emblem     =
|blank_emblem_type      =
|blank_emblem_size      =
|image_map              = 
|mapsize                = 
|map_caption            = 
|image_map1             = 
|mapsize1               = 
|map_caption1           = 
|image_dot_map          =
|dot_mapsize            =
|dot_map_caption        =
|dot_x =  |dot_y =
|pushpin_map            = <!-- the name of a location map as per http://en.wikipedia.org/wiki/Template:Location_map -->
|pushpin_label_position = <!-- the position of the pushpin label: left, right, top, bottom, none -->
|pushpin_map_caption    =
|pushpin_mapsize        =
<!-- Location ------------------>
|subdivision_type       = <!--البلد-->
|subdivision_name       = <!--the name of the البلد-->
|subdivision_type1      = 
|subdivision_name1      = 
|subdivision_type2      = 
|subdivision_name2      = 
<!-- Politics ----------------->
|government_footnotes   =
|government_type        =
|leader_title           =
|leader_name            =  <!--add   (no-break space) to leader names to disable automatic links-->
|leader_title1          =  
|leader_name1           =
|established_title      =  <!-- Settled -->
|established_date       = 
<!-- Area    --------------------->
|area_magnitude         = 
|unit_pref              = <!--Enter: Imperial, to display imperial  before metric-->
|area_footnotes         =
|area_total_km2         = <!-- ALL fields with measurements are subject to automatic unit conversion-->
|area_land_km2          = <!--See table @ Template:Infobox settlement for details on unit conversion-->
|area_water_km2         =
|area_total_sq_mi       =
|area_land_sq_mi        =
|area_water_sq_mi       =
|area_water_percent     =
<!-- Elevation -------------------------->
|elevation_footnotes    =  <!--for references: use <ref> tags-->
|elevation_m            = 
|elevation_ft           =
<!-- Population   ----------------------->
|population_as_of       =
|population_footnotes   =
|population_note        =
|population_total       =
|population_est         =
|pop_est_as_of          =
|population_density_km2 = <!--For automatic calculation, any density field may contain: auto -->
|population_density_sq_mi =
<!-- General information  --------------->
|timezone1              = 
|utc_offset1            = 
|timezone1_DST          = 
|utc_offset1_DST        = 
|latd= |latm= |lats= |latNS=
|longd= |longm= |longs= |longEW=
<!-- Area/postal codes & others -------->
|postal_code_type       =  <!-- enter ZIP code, Postcode, Post code, Postal code... -->
|postal_code            =
|area_code              =
|website                = 
|footnotes              = 
}} 

Name and motto

عدل
Field Name Usage Description
name required if official_name missing The usual name in English
official_name required if name missing The official name in English
other_name optional For places with a former or more common name like Bombay or Saigon
native_name optional This will display under the name/official name
native_name_lang optional ISO 639-2] code, e.g. "fr" for French. If there is more than one native name, in different languages, enter those names using {{رمز لغة}}, instead.
settlement_type optional Any type can be entered, such as City, Town, Village, Hamlet, Municipality, Reservation, etc. If set, will be displayed under the names, provided that name is filled in. Might also be used as a label for total population/area (defaulting to City), if needed to distinguish from Urban or Metro (if urban and metro figures are not present, the label is Total unless total_type is set).
total_type optional Specifies what "total" area and population figure refer to, e.g. Greater London. This overrides other labels for total population/area. For no label, can be set to   (this precise value also causes the total population to be displayed on the same line as the word Population).
nickname optional well-known nickname(s)
motto optional Will place the motto under the nicknames
translit_lang1 optional Will place the "entry" before the word "transliteration(s)". Can be used to specify a particular language like in ديلغ or one may just enter "Other", like in غزة's article.
translit_lang1_type optional
translit_lang1_info optional
translit_lang2 optional Will place a second transliteration. See ديلغ
translit_lang2_type optional
translit_lang2_info optional

Images and maps

عدل
These variables are only used for generating categories for this article
Field Name Usage Description
image_skyline optional Despite the name it can be any image that an editor wishes. Default size will be 250px
imagesize optional Can be used to tweak the size of the image_skyline up or down. This can can helpful if an editor want to make the infobox wider.
image_caption optional Will place a caption under the image_skyline (if present)
image_flag optional Used for a flag. Default size:100px
flag_size optional Can be used to tweak the size of the image_flag up or down from 100px as desired.
flag_link optional
image_seal optional If the place has an official seal.
seal_link optional
seal_size optional Default is 100px.
image_shield optional Can be used for a place with a coat of arms.
shield_link optional Can be used if a wiki article if known but is not automatically linked by the template. See كوكويتلام (كولومبيا البريطانية)'s infobox for an example.
shield_size optional Default is 100px.
image_blank_emblem optional Can be used if a place has an official logo, crest, emblem, etc. Logo is the default type. See كينغستون أبون هول's infobox for an example.
Deprecated name =city_logo
blank_emblem_type optional To specify what type of emblem "image_blank_emblem" is. The default is Logo.
blank_emblem_size optional Default is 100px. Deprecated name =citylogo_size
blank_emblem_link optional Deprecated name =logo_link
image_map optional
mapsize optional Default is 250px.
map_caption optional
image_map1 optional A secondary map image. The field image_map must be filled in first. Example see: بلومسبورغ (بنسلفانيا).
mapsize1 optional Default is 250px.
map_caption1 optional
image_dot_map optional A field for manually superimposing a dot over a blank map using an "X" & "Y" system. Blank maps, if available, can be found over at Wikimedia Commons. Example see: Rainbow Lake, Alberta
dot_mapsize optional To change the dot map size; default is 180px.
dot_map_caption optional For placing a caption under the dot map.
dot_x
dot_y
optional For manually superimposing the dot left/right and up/down on the map.
pushpin_map optional The name of a location map as per قالب:Location map (eg. Indonesia or Russia). The coordinate fields (eg. latd and longd) position a pushpin coordinate marker and label on the map automatically. Example see: بادنغ
pushpin_label_position optional The position of the label on the pushpin map relative to the pushpin coordinate marker. Valid options are {left, right, top, bottom, none}. If this field is not specified, the default value is right.
pushpin_mapsize optional Must be entered as only a number—no need for px. The default value is 250.
pushpin_map_caption optional Fill out if a different caption from map_caption is desired.

Location, subdivisions, government and established information

عدل
Field Name Usage Description
subdivision_type optional almost always "Country"
subdivision_name optional Depends on the subdivision_type - use the name in text form, sample: United States or [[الولايات المتحدة]], don't add flag icons or flag templates in this field.
subdivision_type1
to
subdivision_type4
optional Can be State/Province, region, county.
subdivision_name1
to
subdivision_name4
optional Use the name in text form, sample: Florida or [[فلوريدا]]. Don't add flag icons or flag templates in this field.
seat_type optional The label for the seat of government (defaults to Seat).
seat optional The seat of government.
parts_type optional The label for the smaller subdivisions (defaults to Boroughs).
parts_style optional Set to list to display as a collapsible list, coll as a collapsed list, or para to use paragraph style. Default is list for up to 5 items, otherwise coll.
parts optional Text or header of the list of smaller subdivisions.
p1, p2, etc. optional (maximum p50) The smaller subdivisions to be listed. Example: Warsaw
government_footnotes optional If a reference(s) is available this where to put them using the <ref> </ref> tags and possibly the citing format at {{مرجع ويب}} within the ref tags.
government_type optional Example:
leader_party optional Political party of the place's leader.
leader_title optional First title of the place's leader, e.g. Mayor
leader_name optional Tip: Names are automatically wiki-linked if an article exists; if the target is not the intended one, insert a character such as "&nbsp;" to disable the link
leader_title1
to
leader_title4
optional
leader_name1
to
leader_name4
optional For long lists use {{قائمة مخفية}}. See هاليفاكس for an example.
established_title optional Example: First settled
established_date optional
established_title1 optional Example: Incorporated (town)
established_date1 optional
established_title2 optional Example: Incorporated (city)
established_date2 optional
established_title3 optional
established_date3 optional
extinct_title optional For when a settlement ceases to exist
extinct_date optional
founder optional The name of the settlement's founder
named_for optional The source of the name of the settlement (a person, a place, et cetera)

Geographic information

عدل
These fields have dual automatic unit conversion meaning that if only metric values are entered, the imperial values will be automatically converted and vice versa. If an editor wishes to over-ride the automatic conversion, e.g. if the source gives both metric and imperial or if a range of values is needed, they should enter both values in their respective fields.
Field Name Usage Description
unit_pref optional To change the unit order to imperial (metric), enter imperial. The default display style is metric (imperial). However, the template will swap the order automatically if the subdivision_name equals some variation of the USA or the UK.
For the middle east, a unit preference of dunam can be entered (only affects total area).
All values must be entered in a raw format: no commas, spaces, or unit symbols. The template will format them automatically.
area_footnotes optional If reference(s) are available, this is where to put them, possibly using a citing format such as {{مرجع ويب}}, within <ref> </ref> tags.
area_magnitude optional Area magnitude of total_area in terms of m2. Should enter 1 E+6 for area of 1.0 km2. See 1 E+6 m²
area_total_dunam optional Total area in dunams, which is wiki-linked. Used in middle eastern places like Israel, Gaza, and the West Bank. Value must be entered in raw format, no commas or spaces. Auto-converted to display square kilometers and square miles if area_total_km2 and area_total_sq_mi are empty. Examples: غزة and رام الله
area_total_km2 optional Total area in square kilometers—symbol: km2, which is wiki-linked. Value must be entered in raw format, no commas or spaces. Auto-converted to display square miles if area_total_sq_mi is empty.
Deprecated name =area_total
area_land_km2 optional Land area in square kilometers—symbol: km2. Value must be entered in raw format, no comms or spaces. Auto-converted to display square miles if area_land_sq_mi is empty.
Deprecated name =area_land
area_water_km2 optional Water area in square kilometers—symbol: km2. Value must be entered in raw format, no comms or spaces. Auto-converted to display square miles if area_water_sq_mi is empty.
Deprecated name =area_water
area_total_sq_mi optional Total area in square miles—symbol: sq mi, which is wiki-linked. Value must be entered in raw format, no comms or spaces. Auto-converted to display square kilometers if area_total_km2 is empty.
Deprecated name =TotalArea_sq_mi
area_land_sq_mi optional Land area in square miles—symbol: sq mi. Value must be entered in raw format, no comms or spaces. Auto-converted to display square kilometers if area_land_km2 is empty.
Deprecated name =LandArea_sq_mi
area_water_sq_mi optional Water area in square miles—symbol: sq mi. Value must be entered in raw format, no comms or spaces. Auto-converted to display square kilometers if area_water_km2 is empty.
Deprecated name =WaterArea_sq_mi
area_water_percent optional percent of water without the "%"
area_urban_km2 optional Deprecated name =area_urban
area_urban_sq_mi optional Deprecated name =UrbanArea_sq_mi
area_metro_km2 optional Deprecated name =area_metro
area_metro_sq_mi optional Deprecated name =MetroArea_sq_mi
area_blank1_title optional Example see London
area_blank1_km2 optional
area_blank1_sq_mi optional
area_blank2_title optional
area_blank2_km2 optional
area_blank2_sq_mi optional
elevation_footnotes optional If reference(s) are available, this is where to put them, possibly using a citing format such as {{مرجع ويب}}, within <ref> </ref> tags.
elevation_max_footnotes optional Same as above, but for the "max" elevation. See ليدز
elevation_min_footnotes optional
elevation_m optional Raw number entered in meters. Will automatically convert to display elevation in feet if elevation_ft is empty. However, if a range in elevation (i.e. 5–50 m ) is desired, the editor must enter a converted range in the elevation_m field to over-ride the automatic conversion. use the "max" and "min" fields below
Deprecated name =elevation
elevation_ft optional Raw number, entered in feet. Will automatically convert to display the average elevation in meters if elevation_m field is empty. However, if a range in elevation (i.e. 50–500 ft ) is desired, the editor must enter a converted range in the elevation_m field to over-ride the automatic conversion. use the "max" and "min" fields below
elevation_max_m, elevation_max_ft, elevation_min_m, elevation_min_ft optional Used to give highest and/or lowest elevations, if available, instead of just a single value. Example: هاليفاكس
coor_pinpoint optional If needed, to specify more exactly where (or what) coordinates are given (e.g. Town Hall) or a specific place in a larger area (e.g. a city in a county). Example: محافظة مازوفيا Deprecated name =coor_type
coordinates_type optional Can be used to override the default type and region for coordinates.

If coordinates_type is not used:

  • region will be set according to "subdivision_name", e.g. subdivision_name = United Kingdom will generate coordinates with "region:GB". For Canada and the United States, in addition, "subdivision_name1" will be used, e.g. subdivision_name = Canada and subdivision_name1 = Ontario => "region:CA-ON".
  • type is set to "type:city". If population_total is a number, it is set to type:city(population_total). If the population_total field includes text, symbols or commas, "type:city" is used instead.

If coordinates_type is needed, to specify region, type and scale in accordance with how it is done at {{إحداثيات}}, i.e. |coordinates_type =region:GB_type:city_scale:1000. See برمينغهام or Pie Town  [لغات أخرى]‏ for examples.

coordinates_display optional If the field is empty or not used, the coordinates will be displayed in the infobox only.

Any value will have the coordinates displayed in the article's title as well.

Infobox settlement uses {{إحداثيات}} to call {{إحداثيات}} with the parameter "display=inline,title".

latd optional Latitude degrees. Can also be used for decimal degrees.
latm optional Latitude minutes
lats optional Latitude seconds
latNS optional Latitude North or South (enter N or S).
longd optional Longitude degrees. Can also be used for decimal degrees.
longm optional Longitude minutes
longs optional Longitude seconds
longEW optional Longitude East or West (enter E or W).

Population information

عدل
The density fields have dual automatic unit conversion meaning that if only metric values are entered, the imperial values will be automatically converted and vice-versa. If an editor wishes to over-ride the automatic conversion, e.g. if the source gives both metric and imperial or if a range of values is needed, they can enter both values in their respective fields. To calculate density with respect to the total area automatically, type auto in place of any density value.
Field Name Usage Description
population_as_of optional
population_footnotes optional If reference(s) are available, this is where to put them, possibly using a citing format such as {{مرجع ويب}}, within <ref> </ref> tags.
population_total optional
population_density_km2 optional Deprecated name =population_density
population_density_sq_mi optional Deprecated name =population_density_mi2
population_est optional Population estimate.
pop_est_as_of optional The year or month & year of the population estimate.
population_metro optional
population_density_metro_km2 optional
population_density_metro_sq_mi optional Deprecated name =population_density_metro_mi2
population_urban optional
population_density_urban_km2 optional
population_density_urban_sq_mi optional Deprecated name =population_density_urban_mi2
population_blank1_title optional Can be used for estimates. Example: وندسور (أونتاريو)
population_blank1 optional The population value for blank1_title
population_density_blank1_km2 optional
population_density_blank1_sq_mi optional
population_blank2_title optional
population_blank2 optional
population_density_blank2_km2 optional
population_density_blank2_sq_mi optional
population_demonym Not currently available A demonym or gentilic is a word that denotes the members of a people or the inhabitants of a place. For example citizens in ليفربول are known as ليفربولs.
population_note optional A place for additional information such as the name of the source. See وندسور (أونتاريو) for example.
demographics_type1 optional Section Header. For example: Ethnicity
demographics1_footnotes optional If reference(s) are available for the first demographics section, this is where to put them, possibly using a citing format such as {{مرجع ويب}}, within <ref> </ref> tags
demographics1_title1
to
demographics1_title5
optional Titles related to demographics_type1. For example: White, Black, Hispanic...
demographics1_info1
to
demographics1_info5
optional Information related to the "titles". For example: 50%, 25%, 10%...
demographics_type2 optional A second section header. For example: Languages
demographics2_footnotes optional If reference(s) are available for the second demographics section, this is where to put them, possibly using a citing format such as {{مرجع ويب}}, within <ref> </ref> tags
demographics2_title1
to
demographics2_title5
optional Titles related to demographics_type2. For example: English, French, Arabic...
demographics2_info1
to
demographics2_info5
optional Information related to the "titles" for type2. For example: 50%, 25%, 10%...

Other information

عدل
Field Name Usage Description
timezone1 optional
utc_offset1 optional
timezone1_DST optional
utc_offset1_DST optional
timezone2 optional A second timezone field for larger areas such as a Province.
utc_offset2 optional
timezone2_DST optional
utc_offset2_DST optional
postal_code_type optional
postal_code optional
postal_code2_type optional
postal_code2 optional
area_code_type optional If left blank/not used template will default to "Area code(s)"
area_code optional
blank_name_sec1 optional Can be used for additional information such as car plates
blank_info_sec1 optional This is where the information for the blank_name would go. Example see: Warsaw.
blank1_name_sec1
to
blank6_name_sec1
optional
blank1_info_sec1
to
blank6_info_sec1
optional
blank_name_sec2 optional For a second section of blank fields
blank_info_sec2 optional Example: Beijing
blank1_name_sec2
to
blank_name_sec2
optional
blank1_info_sec2
to
blank6_info_sec2
optional
توأم1
to
توأم7
optional Name of a twin city
توأم1_البلد
to
twin7_البلد
optional Country of the twin city
footnotes optional
website optional

Microformat

عدل

علامات لغة ترميز النص الفائق التي ينتجها هذا القالب تتضمن صيغ إتش كرد  [لغات أخرى]المصغرة، مما يمكن الحواسيب من تجزئة أسماء الأماكن والمواضع. هذا يفيد في عنوان المكان إلى دفتر عناوين مثلا. ضمن صيغة إتش كرد توجد صيغة جيو التي تمكن من تجزئة الإحداثيات. وذلك يفيد في البحث عن المكان في خريطة مثلا.

قوالب فرعية

عدل
  • إذا كان للمكان تاريخ تأسيس أو افتتاح أو ما شابه، استعمل {{تاريخ بداية}}
  • إذا كان له عنوان في الإنترنت، استعمل {{مسار}}
  • إذا كان أحد هذين القالبين مستعملا في موضع ما فلا تحذف بأي حال

أصناف

عدل
  • إتش كرد تستعمل أصنافا للغة تعليم النص الفائق منها
  • adr
  • agent
  • category
  • county-name
  • extended-address
  • fn
  • label
  • locality
  • nickname
  • note
  • org
  • region
  • street-address
  • url
  • vcard
  • جيو تستعمل {{إحداث}} وأصنافا منها
  • geo
  • latitude
  • longitude

دقة

عدل
  • عند إعطاء الإحداثيات، كلما كان المكان صغيرا وجب زيادة دقة الإحداثيات
  • لا تستعمل وسيط الاسم |name= في {{إحداث}}

Usage Example

عدل

from ديترويت، ميشيغان -- Note Pipe characters are in front of the line of cell data, instead of at the end of the line, which simplify the spacing:

{{صندوق معلومات تجمع سكاني
|official_name = City of Detroit
|nickname = Motor City, Motown, Rock City, The D
|motto = "Speramus Meliora; Resurget Cineribus"<br />([[لغة لاتينية]] for, "We Hope For Better Things; It Shall Rise From the Ashes")
|image_skyline = DetroitSkyline.jpg
|image_flag = Detroit flag.png
|image_seal = Detroit Seal.png
|image_map = Wayne County Michigan Incorporated and Unincorporated areas Detroit highlighted.svg
|map_caption = Location in [[مقاطعة وين (ميشيغان)]]، [[ميشيغان]]
|subdivision_type = [[قائمة الدول|البلد]]
|subdivision_type1 = [[ولاية أمريكية]]
|subdivision_type2 = {{Ill-WD2|قائمة مقاطعات ولاية ميشيغان الأمريكية|id=Q588061}}
|subdivision_name = [[الولايات المتحدة]]
|subdivision_name1 = [[ميشيغان]]
|subdivision_name2 = [[مقاطعة وين (ميشيغان)]]
|established_title = Founded
|established_date = [[1701]]
|established_title2 = Incorporation
|established_date2 = [[1806]]
|government_type = [[حكومة مجلس البلدية]]
|leader_title = [[List of mayors of Detroit, Michigan|Mayor]]
|leader_name = [[كوامي كيلباتريك]] (D)
|area_magnitude = 1 E8
|area_total_sq_mi = 143.0
|area_total_km2 = 370.2
|area_land_sq_mi = 138.8
|area_land_km2 = 359.4
|area_water_sq_mi = 4.2
|area_water_km2 = 10.8
|area_urban_sq_mi = 1295
|area_urban_km2 = 3354
|area_metro_km2 = 10135
|area_metro_sq_mi = 3913
|population_as_of = 2006
|population_footnotes = <ref>{{استشهاد ويب
                         | url  = http://www.census.gov/popest/estimates.php
                         | title= US Census July 1, 2006 est}}</ref>
|population_total = 871121
|population_urban = 3903377
|population_metro = 4468966
|population_density_sq_mi = 6856
|population_density_km2 = 2647
|timezone = [[منطقة زمنية شرقية]]
|utc_offset = -5
|timezone_DST = [[منطقة زمنية شرقية]]
|utc_offset_DST = -4
|latd = 42 | latm = 19 | lats = 53.76 | latNS = N
|longd = 83 | longm = 2 | longs = 51 | longEW = W 
|coordinates_display = X
|elevation_footnotes = <ref name=elevation>{{استشهاد ويب
                                      | url  ={{GNIS 3|1617959}}
                                      | title=USGS detail on Detroit
                                      | accessdate=2007-02-18 }}</ref>
|elevation_ft = 600
|elevation_m = 183
|website = http://www.detroitmi.gov
|footnotes =
}}