تلون: الفرق بين النسختين

[نسخة منشورة][نسخة منشورة]
تم حذف المحتوى تمت إضافة المحتوى
لا ملخص تعديل
 
لا ملخص تعديل
سطر 1:
[[ملف:Surfing in Hawaii unmodified.jpg|تصغير|الصورة الأصلية بألوان خافتة نسبيا]]
[[ملف:Surfing in Hawaii+50 LCh chroma.jpg|تصغير|زيادة في الصفاء اللوني بنسبة 50% في الفضاء اللوني CIELAB]]
[[ملف:Surfing in Hawaii+50 saturation.jpg|تصغير|زيادة الإشباع في [[النموذج اللوني ص ش ض|ص ش ض]] 50%. لاحظ أن تغيير الإشباع ص ش ض يؤثر أيضا على إضاءة اللون المدركة]]
[[ملف:Surfing in Hawaii L* channel.jpg|تصغير|المحافظة على إضاءة CIELAB، مع جعل قيم *a و *b معدومة للحصول على تدرج رمادي]]
 
إن مفاهيم '''التلون''' {{إنج|Colorfulness}} و'''[[صفاء اللون|الصفاء اللوني]]''' و'''الإشباع اللوني''' في [[قياس الألوان]] و[[نظرية اللون]] متعلقة ببعضها البعض، ولكن هذه المفاهيم تشير إلى الشدة المدركة للون محدد. '''التلون''' هو الفرق بين اللون مقارنة باللون ال[[رمادي]]. و[[صفاء اللون|الصفاء اللوني]] هي الفرق بين اللون مقارنة ب[[سطوع]] لون آخر يظهر لونه أبيضا تحت ظروف المشاهدة المشابهة. الإشباع هو الفرق بين اللون مقارنة بسطوعه<ref>Mark D. Fairchild. “[http://www.cis.rit.edu/fairchild/PDFs/AppearanceLec.pdf Color Appearance Models: CIECAM02 and Beyond]”. Slides from a tutorial at the IS&T/SID 12th Color Imaging Conference. [[9 November]] [[2004]]. Retrieved [[19 September]] [[2007]].</ref>. ومع أن هذا المفهوم العام هو مفهوم بديهي، إلا أن المصطلحات مثل "الصفاء: chroma"، و"الإشباع: saturation"، و"النقاء: purity"، و"الشدة: intensity" تستخدم غالبا بدون دقة كبيرة حتى عندما تعرّف جيدا بالاعتماد على [[نموذج لوني|النموذج اللوني]] المستخدم.
 
السطر 8 ⟵ 13:
[[تصنيف:لون]]
 
where <math>(x_n,y_n)</math> is the chromaticity of the white point and <math>(x_I,y_I)</math> is the point on the perimeter whose line segment to the white point contains the chromaticity of the stimulus. Different color spaces, such as CIELAB or CIELUV may be used, and will yield different results.
 
== Chroma in CIE 1976 L*a*b* and L*u*v* color spaces ==
 
The naïve definition of saturation does not specify its response function. In the CIE XYZ and RGB color spaces, the saturation is defined in terms of additive color mixing, and has the property of being proportional to any scaling centered at white or the white point illuminant. However, both color spaces are nonlinear in terms of psychovisually perceived [[color difference]]s. It is also possible, and sometimes desirable to define a saturation-like quantity that is linearized in term of the psychovisual perception.
 
In the [[Lab color space|CIE 1976 L*a*b* and L*u*v* color spaces]], the unnormalized '''chroma''' is the radial component of the cylindrical coordinate CIE L*C*h (lightness, chroma, hue) representation of the L*a*b* and L*u*v* color spaces, also denoted as CIE L*C*h(a*b*) or CIE L*C*h for short, and CIE L*C*h(u*v*). The transformation of <math>(a^{*}, b^{*})</math> to <math>(C^{*}, h)</math> is given by:
 
:<math>C_{ab}^* = \sqrt{a^{*2} + b^{*2}}</math>
:<math>h_{ab} = \arctan \frac{b^{*}}{a^{*}}</math>
 
and analogously for CIE L*C*h(u*v*).
 
The chroma in the CIE L*C*h(a*b*) and CIE L*C*h(u*v*) coordinates has the advantage of being more psychovisually linear, yet they are non-linear in terms of linear component color mixing. And therefore, chroma in CIE 1976 L*a*b* and L*u*v* color spaces is very much different from the traditional sense of "saturation".
 
===Chroma in color appearance models===
 
Another, psychovisually even more accurate, but also more complex method to obtain or specify the saturation is to use the color appearance model, like [[CIECAM]]. The '''chroma''' component of the LCh (lightness, chroma, hue) coordinate, and becomes a function of parameters like the chrominance and physical brightness of the illumination, or the characteristics of the emitting/reflecting surface, which is also psychovisually more sensible.
 
== References ==
 
{{reflist}}
 
[[Category:Color]]
 
[[ar:تلون]]
[[be-x-old:Насычанасьць (колер)]]
[[ca:Saturació cromàtica]]